Home Inspector In Aynor vs Indoor Environmental Inspector Aynor
Scope of Work
A home inspector is to conduct his or her inspection in a non-invasive manner. They will look for what they term "material defects" in the home that can hurt the safety of those living in the home or decrease the value of the house. According to the International Association of Certified Home Inspectors, the following is an overview of the necessary assessments made of the house.
- the exterior of the house, mainly the roof, the shell of the house, including drainage,
- the attic structure,
- the heating, cooling, plumbing, and electrical systems,
- all insulation,
- doors and windows by opening and shutting a few windows and doors selected at random,
- the basement of crawl space,
- and the foundation of the house.
The home inspector will work in a non-invasive manner. Finally, a written report identifying any "material defects" will be issued.
Indoor Environmental Inspector:
Scope of Work
The Indoor Environmental Inspector does inspections and testing to determine if the indoor air is unsafe. Some examples of what they would look for is the presence of radon, asbestos, mold, or other VOC's. The basic process will be to:
- inspect the home visually,
- determine a sampling strategy,
- take samples,
- interpret the data that is reported by the laboratory,
- and write the scope of work, if needed, for any remediation necessary.
Where Home Inspections In Aynor Fall Short Finding Major Indoor Environmental Issues
Home inspectors are focused on identifying anything in the systems or parts of the home structure that will negatively affect the safety and value of the home. While very much a part of a house's ecosystem, air quality is not addressed in their scope of work. Their standards under the International Association of Home Inspector's code specifically excludes, in Section 2.2, them from assessing for mold, mildew, asbestos, "airborne hazards such as radon" and air quality in general. These assessments will fall to the Indoor Environmental Inspector/Professional. They will have the training and experience to determine if there are hazardous conditions in your indoor air quality.
What Is The Typical Cost For Home Inspection Services In Aynor
There are many types of specialized home inspections: air quality, radon, termite, water quality, or fireplace inspections that the buyer may require or desire. Other specialists would conduct these tests at additional costs. The average cost for the standard home inspection for a 2,000 square foot house is around $400.00. A larger home will cost more and a smaller house - possibly - less. The area of the country and condition of the residence might prove to be other mitigating factors in cost.
What Is The Typical Cost For Environmental Inspection Services In Aynor
Environmental Inspection Services for possible mold are usually the least costly. They should average about $300 or $400 for a typical sized home. Asbestos will be around $775.00 for the inspection with three samples of the same material for a 2,000 square foot house. The state regulates how many samples are taken for asbestos. Testing for VOC's can cost more even more, again depending on how many materials are sampled and the size of the home. The Inspector will be able to advise you of their costs and scope of work.